There is a problem with the archive on disk. Assuming that you have properly configured the archive under RME > Admin > Config Mgmt > Archive Settings, then try removing one of the problem devices from RME, then re-add it. See if the config can be successfully archived then.
I have done the same,it is working i have deleted one of the device and afer adding Archive is happening but i have so many devices.how we can solve this issue manually doing will take so much time.Kindly suggest
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...