My config archive is not working. So I did a capture and what I see is the switch do a TFTP Write request of file xxxx.200.245.cfg. The response is (from the server) destination unreachable, port unreachable.
I would assume this is a firewall issue, but I got on the server to a command prompt, and did a netstat -ano and the server isn't even listening on UDP port 69. It would appear that TFTP is NOT working, even though it isselected in the Transport Archive Settings
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...