Cisco Configuration Assistant simplifies the task of configuring, deploying, and administering Cisco small business network solutions.
Making sure the network is configured and operating properly is a complex, costly, and time-consuming task. For those of you who don't want to use Cisco Network Assistant for centralized management, but looking for an easy way of configuration of Cisco devices, there may be an option. If you have got an ISR series router, you will definitely have available also a tool called Cisco Security Device Manager or SDM.
SDM is a Java based configuration and monitoring tool which is usually stored in the device's flash, and it's accessible through a web interface of a device. Just enable a web server on your router (Router(config)# ip http server) and put your web browser to the address of your router.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...