Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuration Changes - VLAN ?

Change Audit messages saying that the Vlan information has changed?

Application : Archive Mgmt

RME Server : c2k062

Device : rivashs1

Category : CONFIG_CHANGE

Connection Mode : TELNET

Time : Thu Feb 21 08:54:58 EST 2008

User : ciscoworks

Description : System config collection job : VLAN-RUNNING

Do I need to backup the VLAN information? How can I stop it?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Configuration Changes - VLAN ?

By default, the vlan config will be backed up with the running config. However, the vlan.dat file is opaque data, so RME really can't detect if a change has occurred. It's default behavior is to err on the side of caution, and report a change. However, if you do not want a change record to be generated for vlan.dat, check the "Enable vlan Change Audit Filter" box under RME > Administration > Change Audit > Config Change Filter.

2 REPLIES
Cisco Employee

Re: Configuration Changes - VLAN ?

By default, the vlan config will be backed up with the running config. However, the vlan.dat file is opaque data, so RME really can't detect if a change has occurred. It's default behavior is to err on the side of caution, and report a change. However, if you do not want a change record to be generated for vlan.dat, check the "Enable vlan Change Audit Filter" box under RME > Administration > Change Audit > Config Change Filter.

New Member

Re: Configuration Changes - VLAN ?

Ok thanks, I've turned this on.

116
Views
0
Helpful
2
Replies