Configuration deployment automatization: which tool?
as for lot of adminsitrators, we need to regularly update our equipments configurations, for example: ACL update, new service to activate globally or by interface, etc ...
I need today to activate a service on the IP interfaces (and only them) of the C6500 a network. There are more than 30 chassis, and almost 50 IP interfaces, physical or virtual, by chassis (some interfaces are pure L2). It would take also a long time to deploy that interface by interface, and in addition, it is easy to make mistakes.
We tried to use a TCL script for that. Unfortunatelly, AAA authorization is activated on the equipments, and a bug on the IOS make the script unusable with this feature (I don't develop the details here).
Do someone have any idea how to make that without TCL?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...