Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Configuration Deployment

I need recommendation on how to send configuration changes to (125) 1811 routers at remote end, aside from logging into each router and updating it manually. I appreciate any suggestions.

Thank you,

2 REPLIES
Silver

Re: Configuration Deployment

If you don't have Ciscoworks LMS, then go with "cosi-ciscotool" found here (along with some other great open source tools):

http://cosi-nms.sourceforge.net/alpha-progs.html

HTH

Steve

Cisco Employee

Re: Configuration Deployment

If you have an snmp utility you could use it to copy configs to your devices (provided they have basic snmp config):

http://www.cisco.com/en/US/customer/tech/tk648/tk362/technologies_tech_note09186a0080094aa6.shtml

Also, if you have CiscoWorks, you will need basic config to be able to push other config changes

212
Views
0
Helpful
2
Replies
CreatePlease to create content