Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configure Dial Backup 1811 ISR

I have a cisco 1811 ISR and i want to configure the dial backup on the analog port of router V.92. I don't want to conect an externam analog moden on AUX port. I don't know how to configure this process.

2 REPLIES
Silver

Re: Configure Dial Backup 1811 ISR

I am attaching the Cisco Wireless ISR and HWIC Access Point Configuration Guide please go thought it get your solution.

http://www.cisco.com/application/pdf/en/us/guest/products/ps5853/c2001/ccmigration_09186a008067e9b6.pdf

New Member

Re: Configure Dial Backup 1811 ISR

interface FastEthernet0

backup delay 10 60

backup interface Async1

ip address "ISP static ip and mask"

ip nat outside

ip virtual-reassembly

no ip route-cache cef

no ip route-cache

no ip mroute-cache

speed auto

half-duplex

interface Async1

ip address 170.1.1.16 255.255.255.0

ip nat outside

ip virtual-reassembly

encapsulation ppp

dialer in-band

dialer idle-timeout 300

dialer string "phone number to dial"

dialer-group 1

async mode interactive

keepalive 10 3

fair-queue 64 16 0

ppp authentication chap

!

interface Dialer1

no ip address

no cdp enable

This has worked for me.

151
Views
0
Helpful
2
Replies