try to recover with the following step by step procedure:
stop LMS daeomons with the following command in a DOS box: net stop crmdmgtd
revert the hostname and IP change to reflect the OLD (temporary) entries reboot the server wait until the processes are fully up (takes up to 20 min), then check if LMS up and running again if it is successfull, stop LMS daemons again: net stop crmdmgtd change the IP address to the new IP address; leave the hostname untouched; if necessary change any entry in DNS or hosts file reboot the server wait until the processes are fully up (takes up to 20 min), then check if LMS up and running again
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...