Hi,
I'm curious to find method to configure Power failure on several devices with dual power supply. Recently some devices had major power failure with no alarms triggered on Cisco Works.
Please hlep me.
Tnx,
Satya Singh
snip from 2 devices
---------
6509:
Apr 29 %C6KPWR-SP-4-INPUTCHANGE: Power supply 2 input has changed. Power capacity adjusted to 1171.38W
Apr 29 %C6KPWR-SP-4-PSREDUNDANTMISMATCH: power supplies ratedoutputs do not match.
Apr 29 %C6KPWR-SP-4-PSINPUTDROP: Power supply 2 input has drop ped
Apr 29 %C6KPWR-SP-4-PSNOREDUNDANCY: Power supplies are not infull redundancy, power usage exceeds lower capacity supply
Apr 29 %C6KENV-SP-4-PSFANFAILED: the fan in power supply 2 has failed
Apr 29 %C6KPWR-SP-4-PSFAIL: power supply 2 output failed.
Apr 29 %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in power-redundancy mode, system is operating on one power supply.
Apr 29 %C6KENV-SP-4-PSFANOK: the fan in power supply 2 is OK
Apr 29 %C6KPWR-SP-4-PSOK: power supply 2 turned on.
Apr 29 %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
----
3745
Apr %PS-3-MULTFAIL: There is more than one failure with the Power System 2; please resolve problems immediately
