05-12-2009 05:17 AM
I currently use IPM 2.6. I configured HTTP performance from a remote router to a local server. I got "Data Response Error..." when I view statistics. Do I need to add local server to the target group along with SNMP string? Thank you in advance.
Solved! Go to Solution.
05-12-2009 10:54 AM
05-12-2009 09:42 AM
No. Just make sure that if you've added a hostname for your HTTP server that the router is configured to be able to resolve hostnames to IP addresses.
05-12-2009 10:05 AM
I added host name with its IP address to the source router configuration and am still getting "Data Response Error @
05-12-2009 10:07 AM
What version of code is running on your source router?
05-12-2009 10:10 AM
12.2(18)SXF12a
05-12-2009 10:24 AM
Post the output of show rtr configuration and show rtr coll.
05-12-2009 10:29 AM
6509#sh rtr configuration
Complete Configuration Table (includes defaults)
Entry Number: 7077
Owner: 161|ipm-ciscoworks2-vorabhas
Tag: 6509 to Cha
Type of Operation to Perform: http
Reaction and History Threshold (milliseconds): 5000
Operation Frequency (seconds): 60
Operation Timeout (milliseconds): 5000
Verify Data: FALSE
Status of Entry (SNMP RowStatus): active
Protocol Type: httpAppl
Target Address:
Source Address: 0.0.0.0
Target Port: 0
Source Port: 0
Request Size (ARR data portion): 1
Response Size (ARR data portion): 1
Control Packets: enabled
Loose Source Routing: disabled
LSR Path:
Type of Service Parameters: 0x0
HTTP Operation: get
HTTP Server Version: 1.0
URL: http://chantilly-rt/cgi-bin/routers2.cgi
Proxy:
Raw String(s):
Cache Control: disabled
Life (seconds): infinite - runs forever
Next Scheduled Start Time: Start Time already passed
Entry Ageout (seconds): 3600
Connection Loss Reaction Enabled: FALSE
Timeout Reaction Enabled: FALSE
Threshold Reaction Type: immediate
Threshold Falling (milliseconds): 3000
Threshold Count: 5
Threshold Count2: 5
Reaction Type: trapAndNmvt
Verify Error Reaction Enabled: FALSE
Number of Statistic Hours kept: 2
Number of Statistic Paths kept: 1
Number of Statistic Hops kept: 1
Number of Statistic Distribution Buckets kept: 1
Statistic Distribution Interval (milliseconds): 20
Number of History Lives kept: 0
Number of History Buckets kept: 15
Number of History Samples kept: 1
History Filter Type: none
6509#sh rtr collection-statistics
Collected Statistics
Entry Number: 7077
HTTP URL: http://chantilly-rt/cgi-bin/routers2.cgi
Start Time: 13:18:27.000 EDT Tue May 12 2009
Comps: 0 RTTMin: 0
OvrTh: 0 RTTMax: 0
DNSTimeOut: 0 RTTSum: 0
TCPTimeOut: 0 RTTSum2: 0
TraTimeOut: 0 DNSRTT: 0
DNSError: 0 TCPConRTT: 0
HTTPError: 0 TransRTT: 0
IntError: 60 MesgSize: 0
Busies: 0
Entry Number: 7077
HTTP URL: http://chantilly-rt/cgi-bin/routers2.cgi
Start Time: 14:18:27.000 EDT Tue May 12 2009
Comps: 0 RTTMin: 0
OvrTh: 0 RTTMax: 0
DNSTimeOut: 0 RTTSum: 0
TCPTimeOut: 0 RTTSum2: 0
TraTimeOut: 0 DNSRTT: 0
DNSError: 0 TCPConRTT: 0
HTTPError: 0 TransRTT: 0
IntError: 10 MesgSize: 0
Busies: 0
05-12-2009 10:31 AM
You're still using a hostname for the URL. From this switch, can you run:
telnet chantilly-rt 80
And get a successful connection?
05-12-2009 10:33 AM
6509#telnet chantilly-rt 80
% telnet connections not permitted from this terminal
6509#telnet 192.168.4.35 80
% telnet connections not permitted from this terminal
6509#
ip host chantilly-rt 192.168.4.35
05-12-2009 10:37 AM
Try removing the collector from the device, then re-add it (i.e. delete the collector through IPM then recreate it). Also, make sure that this URL returns a proper result code. You can check this from another host:
telnet chantilly-rt 80
GET /cgi-bin/routers2.cgi HTTP/1.0
(Then hit enter twice)
You should get a proper HTTP response.
05-12-2009 10:49 AM
I changed URL lookup string to http://
I am observing the results.
05-12-2009 10:50 AM
Do you mean you're waiting to see what happens, or you're seeing the same problem?
05-12-2009 10:52 AM
After I changed URL lookup string to server IP address, the error went away and I got 100% successful attempt (2 out of 2).
05-12-2009 10:54 AM
Good.
05-12-2009 10:57 AM
Will the result show up in HTTP report later?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: