Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Configuring Radius server on catalyst 2960 for authentication

Hi,

kindly suggest me how to configure the radius server on catalyst 2960 switch. need to know the exact commands. If possible kindly suggest me some white paper link also.

Regards,

1 REPLY
Silver

Re: Configuring Radius server on catalyst 2960 for authenticatio

This example shows how to configure one RADIUS server to be used for authentication and another to be used for accounting:

Switch(config)# radius-server host 172.29.36.49 auth-port 1612 key rad1

Switch(config)# radius-server host 172.20.36.50 acct-port 1618 key rad2

This example shows how to configure host1 as the RADIUS server and to use the default ports for both authentication and accounting:

Switch(config)# radius-server host host1

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_25_fx/configuration/guide/swauthen.html#wp1091098

5822
Views
0
Helpful
1
Replies
CreatePlease to create content