Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Configuring SNMP on Catalyst Express 500 Switch

Hi all,

I need to enable certain snmp traps and forward the snmp traps from a Catalyst Express 500 Switch to a network management host. How can I do this in the web interface for this switch? I can enable SNMP and also enter the community string. But how can I enable certain traps and send to a server management host?

Thanks.

sjong1122

2 REPLIES
Silver

Re: Configuring SNMP on Catalyst Express 500 Switch

Enable SNMP if you plan to have the switch managed through another network management application. By default, SNMP is disabled.

For more information on Configuring SNMP on Catalyst Express 500 Switch please click following URL:

http://www.cisco.com/en/US/products/ps6545/products_user_guide_chapter09186a0080531ea9.html#wp156418

Cisco Employee

Re: Configuring SNMP on Catalyst Express 500 Switch

You could try using the Trap Managers tab in the SNMP Management window under Device Properties of Cisco Network Assistant

1179
Views
5
Helpful
2
Replies
CreatePlease to create content