Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Copy config via SNMP from switch (CatOS)

I uploading config from switch (6509) to tftp server. Source: <http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa3.shtml>

But config include DEFAULT and NON-DEFAULT configuration.

How copy only NON-DEFAULT configuration?

1 REPLY
Cisco Employee

Re: Copy config via SNMP from switch (CatOS)

You can't. The MIB support to specify which type of config to retrieve has not been implemented. This can be done, however, using a script that connects to the switch via telnet or SSH, then performs a show conf and captures the output.

208
Views
0
Helpful
1
Replies
CreatePlease to create content