Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Copy running config to startup - Ciscoworks LMS 4

We were having a discussion in my group about startup vs running configs, and how often some network managers forget to "click save" when they configure a switch.  Is there a way to configure Ciscoworks to copy the running config to the startup?  I thought I saw one in the config archive jobs, but I can't find it now.

Thanks,

Paul

Everyone's tags (3)
2 REPLIES
Bronze

Re: Copy running config to startup - Ciscoworks LMS 4

You can definitely create a CiscoWorks job that issues the "copy run start" command, but I assume you're wanting it to be a recurring job. I can't remember if CiscoWorks can do recurring jobs...

Or you could just do it from the router itself with an EEM script. Something like:

event manager applet WRITE_MEM

event syslog pattern "%SYS-5-CONFIG_I: Configured"

action 1.0 cli command "wr"

action 2.0 syslog msg "Change detected, saving config..."

Sent from Cisco Technical Support iPad App

Copy running config to startup - Ciscoworks LMS 4

LMS also has the out of sync report that you can use as a basis for the sync

Not sure if this can be scheduled though

Cheers,

Michel

1412
Views
0
Helpful
2
Replies
CreatePlease to create content