Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CPU utilization using snmp

Hey guys,

Need help with snmp configurations on the router or pix which will send cpu utilization messages to syslog server.

Thanks

5 REPLIES
Red

Re: CPU utilization using snmp

SNMP and Syslog are independent protocols. Not sure which one you are looking for. These two links regarding monitor CPU and PIX via SNMP may be helpful to you:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a94.shtml

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a13.shtml

New Member

Re: CPU utilization using snmp

Yes, I want to get messages sent to the syslog server when the pix or router CPU reaches a threshold. This way I am alerted of heavy usage on the pix or router. thanks again for you help

New Member

Re: CPU utilization using snmp

Hi,

You may want to take a look at this link which is more relevant to your question- CPU Thresholding Notification.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_white_paper09186a00801cd87d.shtml

Cheers,

Eric

New Member

Re: CPU utilization using snmp

Thanks a lot ericchan. This is exactly what I was looking for.

Scott

New Member

Re: CPU utilization using snmp

Hi Eric ,

I was checking your update i also have same requirement of CPU Thresholding Notification of my PIX Firewall 535 VER 6.3 but currently the document is not available on the given URL BY YOU ...Will you please provide me the correct one .

My mail is is shariq.qamar@airtel.in

Thanks in Advance

regards

Shariq

496
Views
0
Helpful
5
Replies