cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1324
Views
0
Helpful
4
Replies

Creating a scheduled task in LMS3.2

CSCO11227946
Level 1
Level 1

Hi there,

  I need help to create a scheduled task in LMS. In this task I would like to regularly check time on all network devices in LMS and generate a rapport about this that would be sent to e-mail. All network devices have the same NTP server. How can I create this task? LMS version is 3.2 SP1.

Thanks in advanced.

4 Replies 4

Ganesh Kondaveeti
Cisco Employee
Cisco Employee

Hi,

For such type of request you may like to use the HUM module in LMS compiling the respective NTP MIB in the LMS and getting the report generated using "customize reports" feature but i doubt if you would be able to send that to your email but it would be populated on the server itself which you would be able to check when needed.

Regards

K. Lakshmi Ganesh

Thanks for a quick reply and the advice. Will try with cntpSysClock MIB.

Hi,

I have downloaded CISCO-NTP-MIB from Cisco site> http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=CISCO-NTP-MIB

  MIB Name
  Version 2
1. SNMPv2-SMI
| Download
  • 2. SNMPv2-TC
    | Download|
    3. CISCO-SMI
    | Download|
    4. INET-ADDRESS-MIB
  • | Download|
    5. RFC1155-SMI

    | Non-Cisco MIB |
    6. RFC-1212

    | Non-Cisco MIB |
    7. RFC-1215

    | Non-Cisco MIB |
    8. SNMPv2-TC-v1

    | Non-Cisco MIB |
    9. CISCO-NTP-MIB
    | Download|

    After importing all MIB's from the list I don't have cntpSysClock option to select. Instead of 11 MIB valuse which are included in this CISCO-NTP-MIB

    cntpSysLeap1.3.6.1.4.1.9.9.168.1.1.1
    cntpSysClock cntpSysClock1.3.6.1.4.1.9.9.168.1.1.10
    cntpSysSrvStatus cntpSysSrvStatus1.3.6.1.4.1.9.9.168.1.1.11
    cntpSysStratum cntpSysStratum1.3.6.1.4.1.9.9.168.1.1.2
    cntpSysPrecision cntpSysPrecision1.3.6.1.4.1.9.9.168.1.1.3
    cntpSysRootDelay cntpSysRootDelay1.3.6.1.4.1.9.9.168.1.1.4
    cntpSysRootDispersion cntpSysRootDispersion1.3.6.1.4.1.9.9.168.1.1.5
    cntpSysRefId cntpSysRefId1.3.6.1.4.1.9.9.168.1.1.6
    cntpSysRefTime cntpSysRefTime1.3.6.1.4.1.9.9.168.1.1.7
    cntpSysPoll cntpSysPoll1.3.6.1.4.1.9.9.168.1.1.8
    cntpSysPeer cntpSysPeer1.3.6.1.4.1.9.9.168.1.1.9

    I only have 6 options in cntpSystem. Here is print-screen>

    What seems to be the problem here and how can I import this MIB that i need?

    cntpSysClock1.3.6.1.4.1.9.9.168.1.1.10

    Thanks.

    Can anyone help me with this problem?

    Getting Started

    Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: