Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Creating a scheduled task in LMS3.2

Hi there,

  I need help to create a scheduled task in LMS. In this task I would like to regularly check time on all network devices in LMS and generate a rapport about this that would be sent to e-mail. All network devices have the same NTP server. How can I create this task? LMS version is 3.2 SP1.

Thanks in advanced.

Everyone's tags (8)
4 REPLIES
Cisco Employee

Re: How to create scheduled task in LMS3.2

Hi,

For such type of request you may like to use the HUM module in LMS compiling the respective NTP MIB in the LMS and getting the report generated using "customize reports" feature but i doubt if you would be able to send that to your email but it would be populated on the server itself which you would be able to check when needed.

Regards

K. Lakshmi Ganesh

New Member

Re: How to create scheduled task in LMS3.2

Thanks for a quick reply and the advice. Will try with cntpSysClock MIB.

New Member

Re: How to create scheduled task in LMS3.2

Hi,

I have downloaded CISCO-NTP-MIB from Cisco site> http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=CISCO-NTP-MIB

  MIB Name
  Version 2
1. SNMPv2-SMI
| Download
  • 2. SNMPv2-TC
    | Download|
    3. CISCO-SMI
    | Download|
    4. INET-ADDRESS-MIB
  • | Download|
    5. RFC1155-SMI

    | Non-Cisco MIB |
    6. RFC-1212

    | Non-Cisco MIB |
    7. RFC-1215

    | Non-Cisco MIB |
    8. SNMPv2-TC-v1

    | Non-Cisco MIB |
    9. CISCO-NTP-MIB
    | Download|

    After importing all MIB's from the list I don't have cntpSysClock option to select. Instead of 11 MIB valuse which are included in this CISCO-NTP-MIB

    cntpSysLeap1.3.6.1.4.1.9.9.168.1.1.1
    cntpSysClock cntpSysClock1.3.6.1.4.1.9.9.168.1.1.10
    cntpSysSrvStatus cntpSysSrvStatus1.3.6.1.4.1.9.9.168.1.1.11
    cntpSysStratum cntpSysStratum1.3.6.1.4.1.9.9.168.1.1.2
    cntpSysPrecision cntpSysPrecision1.3.6.1.4.1.9.9.168.1.1.3
    cntpSysRootDelay cntpSysRootDelay1.3.6.1.4.1.9.9.168.1.1.4
    cntpSysRootDispersion cntpSysRootDispersion1.3.6.1.4.1.9.9.168.1.1.5
    cntpSysRefId cntpSysRefId1.3.6.1.4.1.9.9.168.1.1.6
    cntpSysRefTime cntpSysRefTime1.3.6.1.4.1.9.9.168.1.1.7
    cntpSysPoll cntpSysPoll1.3.6.1.4.1.9.9.168.1.1.8
    cntpSysPeer cntpSysPeer1.3.6.1.4.1.9.9.168.1.1.9

    I only have 6 options in cntpSystem. Here is print-screen>

    What seems to be the problem here and how can I import this MIB that i need?

    cntpSysClock1.3.6.1.4.1.9.9.168.1.1.10

    Thanks.

    New Member

    Creating a scheduled task in LMS3.2

    Can anyone help me with this problem?

    515
    Views
    0
    Helpful
    4
    Replies
    CreatePlease to create content