Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Creating Switch ACL in Prime Infrastructure 2.0

Hello,

any idea if it possible to create a cli template to deploy access lists for switches and routers. It should be possible to define source and destination ip addresses as well as multiple line.

thanks in advanced

Alex

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Creating Switch ACL in Prime Infrastructure 2.0

Hi Alex,

Yes ,it is possible. you can check the below link:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-2/user/guide/prime_infra_ug/create_temps.html#wp1124827

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
2 REPLIES
Cisco Employee

Creating Switch ACL in Prime Infrastructure 2.0

Hi Alex,

Yes ,it is possible. you can check the below link:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-2/user/guide/prime_infra_ug/create_temps.html#wp1124827

Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Creating Switch ACL in Prime Infrastructure 2.0

thanks Afroz, you saved my day.

regards

Alex

101
Views
0
Helpful
2
Replies
CreatePlease login to create content