Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUOM 2.1 - SLV not shows all VGs present in DCR.

Dear all,

I added more than 280 VGs to the DCR.

All devices are in monitored state.

CCMs are 5.1.3 version.

Into Service Level View there are only 20-22 Vgs connected with their CCMs.

Each CCM has 70-80 VGs registered to.

Anybody know why I cannot see all VGs into SLV?

Thanks

3 REPLIES
New Member

Re: CUOM 2.1 - SLV not shows all VGs present in DCR.

I have a similar problem as well, but the problem is only with CMM modules (VGs). Please let me know if you find the solution to this.

Silver

Re: CUOM 2.1 - SLV not shows all VGs present in DCR.

Are you guys ACS integrated?

If so, ensure your devices are added to ACS, and ensure CUOM user has access.

Check the home page of Cisco Works on CUOM.

This shows a devices not in ACS count and links to a report detailing which devices are not authorised.

Cheers,

Tim.

Cisco Employee

Re: CUOM 2.1 - SLV not shows all VGs present in DCR.

If the VG's are assigned to a Route Group/Route List within CUCM then these VG's will not be displayed in SLV. You will see a Route List Cloud in SLV and this is where you will see those VG's.

Joe

141
Views
4
Helpful
3
Replies