Re: CW Reclaim Unused Up / Down Reports Not Working
In order for these reports to work, UT must have had a record in its database before the time period for which the report was run. For example, if you run the reclaim unused up report over the past 30 days, there must be a port which is administratively up, but has no end host present in User Tracking. AND there must have been a user connected to that port at least 31 days ago, and that record must still be in the UT database.
Since the default UT delete interval is 30 days, that is not going to happen. Make sure to increase the delete interval to a value that is longer than the desired report period.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...