Cisco IOS does not implement any of the objects in the BGP4-MIB as read-write (only read-only).
However, if you want to bring a neighbor up which is shutdown using SNMP, you could upload a config snippet to the device which removes the shutdown command from the neighbor statement. To do this, follow the instructions in this tech tip:
The MIB defines the MAX-ACCESS as read-write. However, IOS only implements the object as read-only. This is allowed by the MIB specification. There is no error. You will not be able to set this object.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.