Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Deploying a saved configuration to a different switch

Hello, I am using CiscoWorks LMS 3.2 and I am trying to deploy a configuration from one switch, to a different (but same model) switch. Any assistance would be appreciated.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Deploying a saved configuration to a different switch

You can do this under RME > Config Mgmt > Config Editor > Config Files.  Choose the option that says "External Location", choose the device you wish to deploy the configuration to and then select the configuration you wish to deploy from the shadow directory located under CSCOpx/files/rme/dcma.  You need to actually select the configuration file as "Location" under "External Configuration File" ie. C:/Program Files/CSCOpx/files/rme/dcma/shadow/Switches_and_Hubs/PRIMARY/cr-nms-6506e.cfg.  Then click on Edit and hit Deploy.

1 REPLY
Cisco Employee

Re: Deploying a saved configuration to a different switch

You can do this under RME > Config Mgmt > Config Editor > Config Files.  Choose the option that says "External Location", choose the device you wish to deploy the configuration to and then select the configuration you wish to deploy from the shadow directory located under CSCOpx/files/rme/dcma.  You need to actually select the configuration file as "Location" under "External Configuration File" ie. C:/Program Files/CSCOpx/files/rme/dcma/shadow/Switches_and_Hubs/PRIMARY/cr-nms-6506e.cfg.  Then click on Edit and hit Deploy.

167
Views
0
Helpful
1
Replies
CreatePlease login to create content