Detailed Device Report not showing "Number of Ports"
I have a 2621XM device, when I generate the detailed device report, under Module Information, I get the following info, when I look at Ciscoview I can see two 10/100 ports, fa0/0 and fa0/1, why are does this report show Number of Ports as ZERO:
Module Index 3
Parent Index 2
Parent Type container
Slot Number 0
Description C2600 Mainboard
Vendor Type cevModuleUnknownCard
Physical Entity Name
Number of Slots
Number of Ports 0
Inline Power Capable false
Module IP Address
Unique Device Identifier PID : C2600 Mainboard VID : SN
Re: Detailed Device Report not showing "Number of Ports"
This could be an ENTITY-MIB bug. I have a 2651XM, and it is showing the number of ports per module (as well as the mainboard) correctly. What version of code is running on this device? What version of RME? What versions of the Rtr2600XM and SharedInventoryRouter RME packages do you have loaded?
I'm not seeing SharedInventoryRouter package, I looked in the Device Map and i only see packages for SharedInventoryFastSwitch, SharedInventoryCat3900, SharedInventoryCat3900, SharedInventoryCallManager.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...