Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Device and Credentials issue with LMS 2.6

Okay. I have a cisco 4006 that runs set based commands.. I have no idea how I configure snmp on it. Can someone help me with this?

unlike the IOS i just go...

snmp-server community public RO

snmp-server communtiy private RW

but how do I do this in a set based system?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Blue

Re: Device and Credentials issue with LMS 2.6

That's running CatOS then:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa4.shtml

set snmp community read-only public

set snmp community read-write private

The "command ?" online help is also available.

Re: Device and Credentials issue with LMS 2.6

3 REPLIES
Blue

Re: Device and Credentials issue with LMS 2.6

That's running CatOS then:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa4.shtml

set snmp community read-only public

set snmp community read-write private

The "command ?" online help is also available.

Re: Device and Credentials issue with LMS 2.6

Community Member

Re: Device and Credentials issue with LMS 2.6

ah.. boss helped me got it now.

116
Views
0
Helpful
3
Replies
CreatePlease to create content