Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Device center CDP info on LMS 2.6

on Device Center some devices showing wrong(outdated) or no cdp neighbor information.is there any way to re run or update. Many thanks in Advance.

SNMP walk to the devices showing like this...

ifDescr

RFC1213-MIB::ifDescr.1 = STRING: "Vlan1"

RFC1213-MIB::ifDescr.5001 = STRING: "Port-channel1"

RFC1213-MIB::ifDescr.10101 = STRING: "GigabitEthernet0/1"

RFC1213-MIB::ifDescr.10102 = STRING: "GigabitEthernet0/2"

RFC1213-MIB::ifDescr.10103 = STRING: "GigabitEthernet0/3"

RFC1213-MIB::ifDescr.10104 = STRING: "GigabitEthernet0/4"

RFC1213-MIB::ifDescr.10105 = STRING: "GigabitEthernet0/5"

RFC1213-MIB::ifDescr.10106 = STRING: "GigabitEthernet0/6"

RFC1213-MIB::ifDescr.10107 = STRING: "GigabitEthernet0/7"

RFC1213-MIB::ifDescr.10108 = STRING: "GigabitEthernet0/8"

RFC1213-MIB::ifDescr.10109 = STRING: "GigabitEthernet0/9"

RFC1213-MIB::ifDescr.10110 = STRING: "GigabitEthernet0/10"

RFC1213-MIB::ifDescr.10111 = STRING: "GigabitEthernet0/11"

RFC1213-MIB::ifDescr.10112 = STRING: "GigabitEthernet0/12"

RFC1213-MIB::ifDescr.10113 = STRING: "GigabitEthernet0/13"

RFC1213-MIB::ifDescr.10114 = STRING: "GigabitEthernet0/14"

RFC1213-MIB::ifDescr.10115 = STRING: "GigabitEthernet0/15"

RFC1213-MIB::ifDescr.10116 = STRING: "GigabitEthernet0/16"

RFC1213-MIB::ifDescr.10117 = STRING: "GigabitEthernet0/17"

RFC1213-MIB::ifDescr.10118 = STRING: "GigabitEthernet0/18"

RFC1213-MIB::ifDescr.10119 = STRING: "GigabitEthernet0/19"

RFC1213-MIB::ifDescr.10120 = STRING: "GigabitEthernet0/20"

RFC1213-MIB::ifDescr.10121 = STRING: "GigabitEthernet0/21"

RFC1213-MIB::ifDescr.10122 = STRING: "GigabitEthernet0/22"

RFC1213-MIB::ifDescr.10123 = STRING: "GigabitEthernet0/23"

RFC1213-MIB::ifDescr.10124 = STRING: "GigabitEthernet0/24"

RFC1213-MIB::ifDescr.10125 = STRING: "GigabitEthernet0/25"

RFC1213-MIB::ifDescr.10126 = STRING: "GigabitEthernet0/26"

RFC1213-MIB::ifDescr.10127 = STRING: "GigabitEthernet0/27"

RFC1213-MIB::ifDescr.10128 = STRING: "GigabitEthernet0/28"

RFC1213-MIB::ifDescr.10501 = STRING: "Null0"

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Device center CDP info on LMS 2.6

You will need CS 3.0.6 and CM 4.0.11. These aren't as big as a 3.0 upgrade, but they aren't small. You'll have to bring down LMS, and probably take an hour to do the updates.

As a workaround in the time being, you can reinitialize your ANI database:

NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI

After a subsequent Data Collection, this problem should be solved.

3 REPLIES
Cisco Employee

Re: Device center CDP info on LMS 2.6

This is controlled by Campus Manager Data Collection. If you haven't upgraded from 4.0.9 to 4.0.11, this information could become stale due to bugs.

New Member

Re: Device center CDP info on LMS 2.6

thanks J. we have a plan to upgrade to 3.0. I think better to wait!! or it's very small patch

can be done easily. I don't want to do 2 times.

any suggestion. big thanks as always!!!

Cisco Employee

Re: Device center CDP info on LMS 2.6

You will need CS 3.0.6 and CM 4.0.11. These aren't as big as a 3.0 upgrade, but they aren't small. You'll have to bring down LMS, and probably take an hour to do the updates.

As a workaround in the time being, you can reinitialize your ANI database:

NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI

After a subsequent Data Collection, this problem should be solved.

144
Views
0
Helpful
3
Replies