Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Device Type : Unknown in Device Center Home

Hi all,

I am trying to deploy LMS 3.2 in a client, but it receives the following error: On the Device center it shows Device Type as Unknown:

The funny thing is that both devices (2) are shown OK in Chassis View but in Device Center it displays them as unknown.

Please inform me if you need anything else to post.

TIA, Nicos Nicolaides
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Device Type : Unknown in Device Center Home

Sorry, I missed your response.  As Svetlana said, go to RME > Devices > Inventory > Inventory Collection Jobs and run a new Inventory Collection for this switch.  I'm betting it will fail.  When it does, post the IC_Server.log.

6 REPLIES
Cisco Employee

Re: Device Type : Unknown in Device Center Home

What is the device type specifically?  What is its sysObjectID?

Community Member

Re: Device Type : Unknown in Device Center Home

Hi, sorry for the delay,

It is a 3550 switch and the SysID is

.1.3.6.1.4.1.9.1.366

Also find attached some screenshots.

TIA, Nicos Nicolaides
Community Member

Re: Device Type : Unknown in Device Center Home

Anyone? It is a bit urgent you know

TIA, Nicos Nicolaides
Cisco Employee

Re: Device Type : Unknown in Device Center Home

Just run an Inventory collection for this device ;-)

Cisco Employee

Re: Device Type : Unknown in Device Center Home

Sorry, I missed your response.  As Svetlana said, go to RME > Devices > Inventory > Inventory Collection Jobs and run a new Inventory Collection for this switch.  I'm betting it will fail.  When it does, post the IC_Server.log.

Community Member

Re: Device Type : Unknown in Device Center Home

OK, thanks for the reply. One more thing though; i have 2 6500 switches which they use HSRP and have the same cards installed in the same locations (2x sup. 1 FWSM module, 1 IPS module and some ports). The thing is that it sees one switch in LMS and the other one is seen as unknown.Maybe it is because the SVI is on HSRP. i will try to remove it and let u know.

TIA, Nicos Nicolaides
340
Views
0
Helpful
6
Replies
CreatePlease to create content