Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Device unknow in LMS 3.1

hi all,

When I add controllers devices like AIR-WLC 4404-100-K9 in RME this device appears as a unknow. I have checked snmp credentials and it's correct and I have installed device packages but doesn't work. I have checked the device appears in product device support tables too. (http://www.cisco.com/en/US/products/sw/cscowork/ps2425/products_device_support_tables_list.html)

Any idea?

The OID of device is: .1.3.6.1.4.1.14179.1.1.4.3

I attach screeshot.

Thanks

Any idea?

4 REPLIES
Blue

Re: Device unknow in LMS 3.1

Is the WLC running the requisite OS version of 5.0.148.0 or greater that [RME] needs though?

Cisco Employee

Re: Device unknow in LMS 3.1

Make sure you have SNMPv1 enabled on the WLC. It is not enabled by default, but RME will refuse to manage it unless v1 is enabled.

New Member

Re: Device unknow in LMS 3.1

The IOS version of WLC is 4.2.130.0.

Is necessary that snmp v1 is enabled althougth is enabled snmp V2? we have got OID via SNMPWalk from CW.

Thanks

Cisco Employee

Re: Device unknow in LMS 3.1

Yes, it is required that you enable SNMPv1.

157
Views
0
Helpful
4
Replies
CreatePlease login to create content