Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Device Verification

I want to create a user defined group. Then I want to be able to run a test or report that will go out and verify that each device in that group is "alive" - on the network and running. Can someone point me in the right direction.

I am using LMS 3.0.1

Thanks in advance!

3 REPLIES
Cisco Employee

Re: Device Verification

You can do this with the Health and Utilization add-on to LMS 3.0.1. Go to HUM > Poller > Poller Management, and create a new poller. Select your user-defined group, then select the Device Availability template. Check the Poll All Instances box, and leave the poller interval at five minutes. That will periodically check to make sure all devices in that group are reachable.

New Member

Re: Device Verification

We have not purchased the HUM and our evaluation period has expired. Is there another way you are aware of?

Cisco Employee

Re: Device Verification

You could use RME's check device credentials report. This can be executed under RME > Devices > Device Management > Device Credential Verification Jobs.

111
Views
0
Helpful
3
Replies