The devices were already in the ACS server. Also I manually 6 more devices yesterday and they are now in the same state. Basically they are in DCA but only appear in the device not added to ACS report.
Sometimes you may need to restart dmgtd for devices to be properly recognized by DCR. Also, verify that the devices have their IP address entered in DCR, and those IP addresses match what is in ACS (or match an ACS wildcard IP value). Using hostnames only may not necessarily match between DCR and ACS.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...