Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Devices not reporting Model number - LMS 2.6

Since not all devices advertise a model type because the device has to support the ENTITY-MIB to do this. And it depends on the software version. How do you find out? I have several C2950 devices running IOS 12.1(19)EA1a and they are not reporting model in Detailed Device report.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Devices not reporting Model number - LMS 2.6

Full ENTITY-MIB migration was not done until RME 4.1. In RME 4.1.1, I have a 2950 which is properly reporting model details in the RME Detailed Device Report:

Index Description Chassis Serial Number Chassis Vendor Type Chassis Model Name Physical Entity Name Slot Configuration Manufacturer Name Slot Capacity Free Slots Chassis Version Report Published Unique Device Identifier

1 Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports FOC0824Y05C ws-c295024 WS-C2950-24 nms-dmz-2950-a 0 cisco 0 0 P0 false PID : nms-dmz-2950-a Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports WS-C2950-24 VID : P0 SN : FOC0824Y05C

1 REPLY
Cisco Employee

Re: Devices not reporting Model number - LMS 2.6

Full ENTITY-MIB migration was not done until RME 4.1. In RME 4.1.1, I have a 2950 which is properly reporting model details in the RME Detailed Device Report:

Index Description Chassis Serial Number Chassis Vendor Type Chassis Model Name Physical Entity Name Slot Configuration Manufacturer Name Slot Capacity Free Slots Chassis Version Report Published Unique Device Identifier

1 Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports FOC0824Y05C ws-c295024 WS-C2950-24 nms-dmz-2950-a 0 cisco 0 0 P0 false PID : nms-dmz-2950-a Cisco Catalyst c2950 switch with 24 10/100 BaseTX ports WS-C2950-24 VID : P0 SN : FOC0824Y05C

122
Views
0
Helpful
1
Replies
CreatePlease to create content