When running a Device credential verification report for our core switch in RME, it shows up as Passed but the core switch shows up in DFM as Questioned. I even changed the SNMP timeout to 10 sec from 4 sec but to no avail.
When i try to find out the reason for Questioned, it shows up as SNMP timeout:
IP Address = 172.20.2.2
DNS Name = CMUQ-CORE1-VL590.GW.CMUQ.NET
Device Status = Questioned
Device Type = Switches and Hubs
Aliases = N/A
Containments = N/A
DFM Processing = N/A
Time Last Discovered = 08-Sep-2008 13:26:17
Import Time Stamp = 14-Aug-2008 11:37:46
*** Data Collector Status Information ***
Error Code = Snmp Timeout
Error Message = N/A
If i try to import from DCR, i am seeing a completely blank list. Do i need to upgrade to a higher version of DFM to fix this?
This is a known bug, and yes, you will need to upgrade DFM to 3.0.4 or higher. The current version of DFM for LMS 3.0.1 is 3.0.5, and it is a recommended upgrade. to get there, you will first need to upgrade to LMS 3.0.1 from http://www.cisco.com/cgi-bin/tablebuild.pl/lms301 . Then you can download the DFM updates from Common Services > Software Center > Software Update.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...