Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

DFM 3.2.0 problems - fails to start

DFM 3.2.0 is failing to start under Solaris.

I get the following under High Severity Alerts.

"An exception occurred.Please check the AAD.log file for further details."

The Critical Message Window under CS shows this:

"Processes DfmBroker are down"

AAD.log and pdshow attached.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: DFM 3.2.0 problems - fails to start

Ye, tcp/9002 is in use by another process. You must free up this port, then restart dmgtd.

4 REPLIES
Cisco Employee

Re: DFM 3.2.0 problems - fails to start

Post the /opt/CSCOpx/objects/smarts/local/logs/brstart.log. This is most likely due to a port conflict. DFM requires tcp/9002 to be available.

New Member

Re: DFM 3.2.0 problems - fails to start

Log attached.

Cisco Employee

Re: DFM 3.2.0 problems - fails to start

Ye, tcp/9002 is in use by another process. You must free up this port, then restart dmgtd.

New Member

Re: DFM 3.2.0 problems - fails to start

Ok managed to free up the port, restarted dmgtd, still no luck.

Decided to delete NMSROOT\log\pidm.log, restarted dmgtd and it worked.

148
Views
0
Helpful
4
Replies
CreatePlease to create content