05-22-2008 07:36 AM
I have sent up email notifications in DFM without issues but for some reason we are getting emails ever 12 minutes or so for the same devices. Here is the error. We don't see any issues not flapping nothing in the logs. How do we condition the alerts to send out a certain amount of times?
EVENT ID = 0000174
ALERT ID = 00000SN
TIME = Thu 22-May-2008 10:41:22 EDT
STATUS = ERROR
SEVERITY = Critical
MANAGED OBJECT = fc01aswa01.corp.citistreet.org
MANAGED OBJECT TYPE = Switches and Hubs
EVENT DESCRIPTION = OperationallyDown::Component=PORT-fc01aswa01.corp.citistreet.org/1.49 [Gi0/1];ComponentClass=Port;ComponentEventCode=1076;Type=ETHERNETCSMACD;IsFlapping=false;AdminStatus=NOTPRESENT;MaxSpeed=1000000000;OperStatus=NOTPRESENT;InterfaceCode=CODEUNKNOWN;
CUSTOMER IDENTIFICATION = Networkers
Solved! Go to Solution.
05-22-2008 07:39 AM
We've seen this before on certain devices, but typically not with ethernet interfaces. The ifAdminStatus and ifOperStatus actually bounce between up and notPresent. This is always a device issue. If this port is a GBIC or SFP port, you might have a bad module.
05-22-2008 07:39 AM
We've seen this before on certain devices, but typically not with ethernet interfaces. The ifAdminStatus and ifOperStatus actually bounce between up and notPresent. This is always a device issue. If this port is a GBIC or SFP port, you might have a bad module.
05-22-2008 07:55 AM
Thanks for the quick response. I will pass this info along to our Network group.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide