I had some 3500 switches with redundant links to my core switches, and I decided to remove the second link. Once I removed them, and removed the trunking commands as well, LMS still is keeping these active alerts on the portal dashboard. Is there a way to permantely remove these?
PORT-Switchostname/65 [Fa0/48] [Uplink to 6509 (P3/38)]
Its basically is saying that the previous uplink (F0/48) is down. Its true that is it down because I removed it because I am now using G0/1. I basically want LMS to stop alerting me on this interface because I am no longer using it as an uplink trunking port.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...