Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DFM alerts

I'm working on making adjustments to email notifications. I'm getting backupactivate notifications from c2811 router with ISDN T1 connection everytime a phone call is established. I have to completely remove the device for DFM monitoring to prevent email floods, my preference being to monitor this device for other activity and disable these false alerts. Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: DFM alerts

You can disable this event for a specifc group of interfaces.  To do this, go to DFM > Configuration > Polling and Thresholds > Managing Thresholds.  Select DFM > System Defined Groups > Interface Groups > Backup.  Click View, then click View Interfaces.  You should see your 2811 interfaces here.  If so, exit this window, then click the Edit button.  Check the box to disable all thresholds for this group.  Save your changed, then go to Apply Changes under Polling and Thresholds, and you should be set.

2 REPLIES
Cisco Employee

Re: DFM alerts

You can disable this event for a specifc group of interfaces.  To do this, go to DFM > Configuration > Polling and Thresholds > Managing Thresholds.  Select DFM > System Defined Groups > Interface Groups > Backup.  Click View, then click View Interfaces.  You should see your 2811 interfaces here.  If so, exit this window, then click the Edit button.  Check the box to disable all thresholds for this group.  Save your changed, then go to Apply Changes under Polling and Thresholds, and you should be set.

New Member

Re: DFM alerts

Thanks!

218
Views
0
Helpful
2
Replies