I am running LMS 2.6 and have an issue with inside static NATs. It seems that DFM discovers and monitors these NAT statements and should a user shut down one of the devices associated with a NAT statement this will cause a red alarm on the alerts and activitied screen. Does anyone know how to disable the monitoring of static NATs? The IP addresses associated with the NAT statements may be part of a loopback address or may not. It doesn't seem to matter. Any help will be greatly appriciated.
If you have DFM 2.0.10, you can use the bulk management scripts under NMSROOT/objects/smarts/utils (documented in the online help) to unmanage those IP addresses within DFM. There is also another script available from TAC for bug CSCsb48643 that will allow you to do the same thing.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...