Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

DFM and SNMP

hey folks, I'm looking through the guide for DFM and I'm seeing things such as SNMPV3 Auth/Priv isnt supported only AuthNOPriv...Is there any way around this??? My SNMP config in CS is for SNMPV3 auth/priv...

thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: DFM and SNMP

If you need to manage devices with DFM, you will need to use v3 authNoPriv for your SNMP credentials in DCR. Support for authPriv is coming in DFM 3.1.2 which should be out by next month.

5 REPLIES
Cisco Employee

Re: DFM and SNMP

If you need to manage devices with DFM, you will need to use v3 authNoPriv for your SNMP credentials in DCR. Support for authPriv is coming in DFM 3.1.2 which should be out by next month.

New Member

Re: DFM and SNMP

thanks J...

bruce

New Member

Re: DFM and SNMP

hey J,

sorry, had one more question...you wouldnt happen to have a readme doc for 3.1.2 do you? or something I could reference that outlines the support for auth/priv

Cisco Employee

Re: DFM and SNMP

It has not been published yet. You'll find a hint of it if you search Cisco.com, but you will not be able to read it. It will be published when DFM 3.1.2 is released.

The following will be supported:

Auth: MD5, SHA

Priv: DES, AES128

All other privacy algorithms will not be supported.

New Member

Re: DFM and SNMP

thanks again...

123
Views
0
Helpful
5
Replies
CreatePlease to create content