Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

DFM supported devices

Hi,

DFM doesn't seem to recognize the 2960 PoE switch ( Catalyst 2960-48PST-L). The status of the devices is unknown. I tried the software and device update but it prompted that there are no updates for DFM. I am using LMS 3.1. What should I do?

Thanks in advance

8 REPLIES
Cisco Employee

Re: DFM supported devices

What is the sysObjectID of this switch? Exactly what version of DFM do you have?

Community Member

Re: DFM supported devices

Hi,

DFM version is 3.1

This is the only output of the SNMP walk I did.

Compiled Thu 21-Aug-08 15:59 by nachen"

RFC1213-MIB::sysObjectID.0 = OID: CISCO-SMI::ciscoProducts.1016

EXPRESSION-MIB::sysUpTimeInstance = Timeticks: (17293912) 2 days, 0:02:19.12

RFC1213-MIB::sysContact.0 = ""

RFC1213-MIB::sysName.0 = STRING: "2960_NUR10_P_100"

RFC1213-MIB::sysLocation.0 = ""

RFC1213-MIB::sysServices.0 = INTEGER: 2

SNMPv2-MIB::sysORLastChange.0 = Timeticks: (0) 0:00:00.00

RFC1213-MIB::ifNumber.0 = INTEGER: 55

RFC1213-MIB::ifIndex.1 = INTEGER: 1

RFC1213-MIB::ifIndex.800 = INTEGER: 800

RFC1213-MIB::ifIndex.10001 = INTEGER: 10001

RFC1213-MIB::ifIndex.10002 = INTEGER: 10002

RFC1213-MIB::ifIndex.10003 = INTEGER: 10003

RFC1213-MIB::ifIndex.10004 = INTEGER: 10004

RFC1213-MIB::ifIndex.10005 = INTEGER: 10005

RFC1213-MIB::ifIndex.10006 = INTEGER: 10006

RFC1213-MIB::ifIndex.10007 = INTEGER: 10007

RFC1213-MIB::ifIndex.10008 = INTEGER: 10008

RFC1213-MIB::ifIndex.10009 = INTEGER: 10009

RFC1213-MIB::ifIndex.10010 = INTEGER: 10010

RFC1213-MIB::ifIndex.10011 = INTEGER: 10011

RFC1213-MIB::ifIndex.10012 = INTEGER: 10012

RFC1213-MIB::ifIndex.10013 = INTEGER: 10013

RFC1213-MIB::ifIndex.10014 = INTEGER: 10014

RFC1213-MIB::ifIndex.10015 = INTEGER: 10015

RFC1213-MIB::ifIndex.10016 = INTEGER: 10016

RFC1213-MIB::ifIndex.10017 = INTEGER: 10017

RFC1213-MIB::ifIndex.10018 = INTEGER: 10018

RFC1213-MIB::ifIndex.10019 = INTEGER: 10019

RFC1213-MIB::ifIndex.10020 = INTEGER: 10020

RFC1213-MIB::ifIndex.10021 = INTEGER: 10021

RFC1213-MIB::ifIndex.10022 = INTEGER: 10022

RFC1213-MIB::ifIndex.10023 = INTEGER: 10023

RFC1213-MIB::ifIndex.10024 = INTEGER: 10024

RFC1213-MIB::ifIndex.10025 = INTEGER: 10025

RFC1213-MIB::ifIndex.10026 = INTEGER: 10026

RFC1213-MIB::ifIndex.10027 = INTEGER: 10027

RFC1213-MIB::ifIndex.10028 = INTEGER: 10028

RFC1213-MIB::ifIndex.10029 = INTEGER: 10029

RFC1213-MIB::ifIndex.10030 = INTEGER: 10030

RFC1213-MIB::ifIndex.10031 = INTEGER: 10031

RFC1213-MIB::ifIndex.10032 = INTEGER: 10032

RFC1213-MIB::ifIndex.10033 = INTEGER: 10033

RFC1213-MIB::ifIndex.10034 = INTEGER: 10034

RFC1213-MIB::ifIndex.10035 = INTEGER: 10035

RFC1213-MIB::ifIndex.10036 = INTEGER: 10036

RFC1213-MIB::ifIndex.10037 = INTEGER: 10037

RFC1213-MIB::ifIndex.10038 = INTEGER: 10038

RFC1213-MIB::ifIndex.10039 = INTEGER: 10039

RFC1213-MIB::ifIndex.10040 = INTEGER: 10040

RFC1213-MIB::ifIndex.10041 = INTEGER: 10041

RFC1213-MIB::ifIndex.10042 = INTEGER: 10042

RFC1213-MIB::ifIndex.10043 = INTEGER: 10043

RFC1213-MIB::ifIndex.10044 = INTEGER: 10044

RFC1213-MIB::ifIndex.10045 = INTEGER: 10045

RFC1213-MIB::ifIndex.10046 = INTEGER: 10046

RFC1213-MIB::ifIndex.10047 = INTEGER: 10047

RFC1213-MIB::ifIndex.10048 = INTEGER: 10048

RFC1213-MIB::ifIndex.10101 = INTEGER: 10101

RFC1213-MIB::ifIndex.10102 = INTEGER: 10102

RFC1213-MIB::ifIndex.10103 = INTEGER: 10103

RFC1213-MIB::ifIndex.10104 = INTEGER: 10104

RFC1213-MIB::ifIndex.10501 = INTEGER: 10501

Cisco Employee

Re: DFM supported devices

No, this device is not yet supported in DFM 3.1. It looks as though support is planned for early next month.

Community Member

Re: DFM supported devices

Thanks! we're planning to upgrade our lms to v3.2. will this device be supported fir that version?

Cisco Employee

Re: DFM supported devices

Yes, it should be supported around the same time.

Community Member

Re: DFM supported devices

thanks so much!

Community Member

DFM unsupported devices - WS-C2960-48PST-L

Hello,

In the last version of LMS 3.2, with DFM version 3.2.0, I dont integrate this equipment and only that. But it is visible in all the other modules. Do you have an solution or a patch to integrate this element.

Thanks in advance for your help.

By

David

Cisco Employee

Re: DFM unsupported devices - WS-C2960-48PST-L

This device is now supported in DFM 3.2.  Make sure you have the latest DFM device updates by going to Common Services > Software Center > Device Update.  Download and install all updates for DFM and Common Services.

354
Views
0
Helpful
8
Replies
CreatePlease to create content