Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

DFM unable to send email notification

Hi All,

We encountered a problem on Ciscoworks LMS 3.1 where DFM was unable to send email notification regarding a loop that was detected on the switch. Upon checking, the switch is on "Known" status ob DFM and is part of a running notification group. Email notification for that group is running as well. Event set concerning Flapping is also checked and points to the same notification group. The error was logged though on the Syslog Messages report from Device Center.

What are the things that I could check to verify if DFM did not send email notification? Appreciate your help on this.

1 REPLY
Silver

Re: DFM unable to send email notification

If you are having difficulty getting the notifier to work, try these steps:

Stop and then restart DfmMailNotifier.

If stop/restart DfmMailNotifier does not resolve the problem, stop and then restart the DfmServer and the DfmMailNotifier

http://www.cisco.com/en/US/products/sw/cscowork/ps2421/products_configuration_example09186a00800c460f.shtml#veri

134
Views
0
Helpful
1
Replies
CreatePlease to create content