I am interested in implementing DHCP snooping on a piece of my network. When I configure DHCP snooping on this piece of the network I am understand that snooping will also be configured on the CORE and all devices leading back to the DHCP servers. Will configuring snooping on these devices affect DHCP operation with the remaining non configured network users? Also, on the devices in the path will I only have to configure ip dhcp snooping globally and then place the switch and DHCP server links at trusted? Thanks in advance.
Thank you, I went ahead and tested this out. The configuration guide only shows scenarios of a local DHCP server connected to the access switch. I was trying to ensure that DHCP snooping did not have to be configured throughout the network infrastructure. I verified today that DHCP snooping only needs to be applied to the access switch and the L3 switch.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...