No. IPM leverages the IP SLA feature on IOS devices to measure latency, availability and jitter. It allows you to configure IP SLA collectors on devices, then allows you to monitor those collectors in realtime, or report on historical stats. It does not support the graphing and reporting of arbitrary MIB objects.
That's where HUM comes in. HUM is like MRTG, cricket, or cacti. It allows one to setup pollers to monitor arbitrary MIB objects, or use built-in templates for CPU, memory, interface utilization, etc.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...