Hey all, kinda new to this whole network management thing, but I've been trying to determine why there is a huge discrepenacy in network speed for users on the same switch. I can get about 30mbps while my boss can only get 6 mbps. We are both located on the same switch, and we have different users on the same switch with a similar issue.
I've determined it's not a cable issue by plugging a test machine directly into the switch, and it got the same speed from any port I tried. Tried switching our ports and he's still slow. The ports have exactly the same configuration. The switch doesn't have the most current version of IOS, but I don't think it could be that. Running out of ideas and it'd be great if I could fix this. Any ideas would be great.
The question of how much you are able to consume in terms of bandwidth is limited to what your laptop can take.
Dont think its a problem with duplex settings as you already tried a different workstation on the switchport.
Now what are you monitoring? If its the traffic passing through the port, then try downloading more, reduce the time interval to 30seconds for the port and input command "show int f0/0" as an example. See how Much traffic is going through for a period of time and compare values with your NMS. It should be same
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.