Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Discovering Devices beyond firewall on CiscoWorks

I have deployed Ciscoworks and can collect all LAN devices up to the firewall. what configurations do i need to make so as to collect WAN device information?

Tahnk you for your time and Assistance,

Genet

3 REPLIES
Cisco Employee

Re: Discovering Devices beyond firewall on CiscoWorks

Campus Manager Discovery requires CDP, ILMI, or ELMI to be enabled for it to automatically find devices. Since none of our firewall products support those technologies, Discovery will not find devices behind them.

As a workaround, you will need to add multiple seed devices: one on the inside of the firewall, and one on the outside. While the network will appear disjoint where the firewall is, you will find all other devices on both sides.

New Member

Re: Discovering Devices beyond firewall on CiscoWorks

Thank You very much for your time and assistance. What about Nokia Firewall, it also doesn't support those technologies?

Thank you again and Kind Regards,

Genet.

Cisco Employee

Re: Discovering Devices beyond firewall on CiscoWorks

The same thing is true for any non-Cisco routing device.

167
Views
0
Helpful
3
Replies