Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

display N7K and switch 4507 module in the LMS 4.1

i have two  cisco Nexus7000 C7009 (9 Slot) Chassis ("Supervisor module-1X")

  Intel(R) Xeon(R) CPU         with 8251592 kB of memory.

, two switches 4507 with supervisor 848GBPS

each switches 4507 have four modules

and switches 2960

1- 4500  6 ports 10 GE (X2) module .

2-4500 48 ports 10/100/100 RJ-45 module .

3-4500 12 ports GE(SFP) module .

4- 4500 12 port 10 GE ( SFP) module .

i configured the snmp in the 4500  and 2960 switches as the below

snmp-server community test RO
snmp-server community puplic RW
snmp-server enable traps
snmp-server host 10.1.1.10 traps test

snmp-server trap-source Vlan91

logging on

logging host 10.1.1.10

logging trap alerts

logging source-interface Vlan91

ip http secure-server

ip http authentication local

username admin privillage 15 password Aadmin123

enable secret aggn

line vty 5 15

transport input ssh

login local

also i configured the SNMP in the N7K switches as the below

snmp-server community test group network-admin

snmp-server community puplic group network-operator

snmp-server host 10.1.1.10 version v2 test

username admin password Aadmin123 role network-admin

the server lms 4.1 can display switches 2960 in the cisco view .

aslo LMS display switches 4500 with module 1,2 and supervisor but can not display module 3 and 4 for switches 4500 .

the LMS also can not disply N7K in the cisco view .

i need steps for the LMS to display switches 4500 and N7K  in the cisco view.

regards ,

Everyone's tags (7)
348
Views
0
Helpful
0
Replies
CreatePlease to create content