Re: Display topology Services in client with IExplore 7 or Firef
as jclarke mentioned on this forum yet, the most likely cause is that the client cannot connect to the server on TCP ports 42342 and 43242 because of a firewall (e.g. local firewall on the client) or accesslist that prevents this.
For a test try to connect to the server on these ports:
Also the name of the LMSserver must be resolvable on the client.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...