Duplicate alarms(High Utilization and Drops) in DFM
Hi, my name is Gabriel and im from Argentina. I´m having a very big problem .I´m using DFM Mail notifier only for those interfaces that are having high Utilization and Drops. My problem appears when a P2P link is over the thresshold and the mail notifier sends one mail per each interface that it´s over the thresshold
that i configure. I believe that it must be a way to configure the DFM to send an email only for one interface(it´s obvious, if an interface in a p2p link it´s over the thresshold the other will be over too) or maybe it can check those things(drops and High U.) per link and not per interface. This problem makes me receive for 1 alarm, 2 mails for active, and 2 mails for clear.
Re: Duplicate alarms(High Utilization and Drops) in DFM
DFM is works that way. If normally sees devices individually and doesn't take the connection between devices into consideration. If you do not want to get duplicate alarm, try managing one interface of the link in DFM.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.