Normally we will get to the location to check if something went wrong through the feedback from user that their LAN ports is not working. Is there any ways to know in advance that this switches need to be replaced instead of waiting for users to complaint?
Sometimes the switches is working and nothing seemed to be wrong. I vefiy it using "Show post" command. However, within 3 days this switches is failure and need to be replaced. Thanks!
What type and how many switches do you need to monitor? If only a few you could look at an open source network management system (NMS), if you have hundreds or thousands there are commercial NMS products. Both types can do proactive monitoring (via SNMP, syslog, etc) and notify you when there are problems.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...