Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

EEM Assistance

I have Redundant WAN's, I want track the availability of both from the Core, if either is WAN is Lost I want to apply a Service olicy that will remark Video Traffic to DSCP 11. I have the following.

track 120 ip route 10.223.0.120/30 reachability

track 124 ip route 10.223.0.124/30 reachability

track 401 list boolean and

  object 120

  object 124

class-map type qos match-all VIDEO

  match dscp 34

policy-map type qos VIDEO_STOP

  class VIDEO

    set dscp 10

event manager applet VIDEO_STOP

  event track 401 state down

  action 1.0 cli command "enable"

  action 2.0 cli command "config t"

  action 3.0 cli command "int e8/23"

  action 4.0 cli command "service-policy output VIDEO_STOP"

  action 5.0 cli command "int e8/24"

  action 6.0 cli command "service-policy output VIDEO_STOP"

  action 7.0 cli command "end"

labCDCNX1-CS1# sh event manager policy internal VIDEO_STOP

                          Name : VIDEO_STOP   

                   Policy Type : applet

           Event Specification : event track 401 state down

                        Action : 1.0,vsh,sup:command "enable";2.0,vsh,sup:comman

d "config t";3.0,vsh,sup:command "int e8/23";4.0,vsh,sup:command "service-policy

output VIDEO_STOP";5.0,vsh,sup:command "int e8/24";6.0,vsh,sup:command "service

-policy output VIDEO_STOP";7.0,vsh,sup:command "end"

Event Specification active on : Standby, Active

labCDCNX1-CS1#

But when I meet the tracking criteria, the policy-map is not appied

Thanks

Mark

Everyone's tags (2)
1 REPLY
Cisco Employee

EEM Assistance

284
Views
0
Helpful
1
Replies
CreatePlease to create content