Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Cisco Employee

EEM script is not detecting message ""%CISCO400R-6-SIM_ACTIVATION: SIM in slot 1 is being activated. Please wait for modem to come UP."

am trying to execute below script and its failing can some one help?

 

event manager applet nano-1

event syslog pattern "%CISCO400R-6-SIM_ACTIVATION: SIM in slot 1 is being activated. Please wait for modem to come UP."

action 1.0 cli command "enable"

action 1.1 cli command "configure term"

action 1.2 cli command "do cellular 0/0/0 microcode activate 2"

 

event manager applet nano-2

event syslog pattern "%CISCO400R-6-SIM_ACTIVATION: SIM in slot 0 is being activated. Please wait for modem to come UP."

action 1.0 cli command "enable

action 1.1 cli command "configure term"

action 1.2 cli command "do cellular 0/0/0 microcode activate 4"

 

Everyone's tags (1)
2 REPLIES
Cisco Employee

is it like EEM script only

is it like EEM script only detect  Sev5 sys log messages?

Cisco Employee

Try the EEM policy without

Try the EEM policy without the % sign in the syslog pattern.

31
Views
0
Helpful
2
Replies