Emails are not sent to SMTP relay when Syslog generates automated action
We have LMS 2.6 on win2003 and it is working well. We are able to get emails sent from DFM when an alert occurs and through the notify button. We now want to set it up so that syslog sends an email for certain errors. Syslog is working bit the smtp.log shows that it cannot connect to the SMTP server.
[ Fri May 11 10:02:20 BST 2007 ] INFO [Util : sendMail] : sendMail() - Starts
[ Fri May 11 10:02:20 BST 2007 ] INFO [Util : sendMail] : SMTP Server:10.129.7.100
[ Fri May 11 10:02:20 BST 2007 ] INFO [Util : sendMail] : From ID:firstname.lastname@example.org
[ Fri May 11 10:02:20 BST 2007 ] INFO [Util : sendMail] : To ID:email@example.com
[ Fri May 11 10:02:20 BST 2007 ] INFO [Util : sendMail] : Subject:CW RME Syslog AA
[ Fri May 11 10:02:20 BST 2007 ] ERROR [Util : sendMail] : Error in connecting the SMTP server [10.129.7.100]
Re: Emails are not sent to SMTP relay when Syslog generates auto
DFM and RME use different underlying SMTP libraries, but this error looks to be pretty low-level. Are you using the same SMTP server in both Common Services and DFM? A sniffer trace of the RME-to-SMTP traffic may prove useful in isolating the problem.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...